|
1/2/3/4/5/6/7/8/9
EDSI has years of experience with tube fittings of the Euroklemp brand. This modular system is applied across the world. The tubes you need for this (steel, aluminium or stainless steel) are standard and available across the world. The Euroklemp tube fittings are TÜV-certified and meet the strictest safety requirements. You can also order accessories with EDSI which allows you to make many combinations of constructions.
Short Tee Type 02
 |
| Type |
Size |
Weight |
| 2B |
26,9 mm
|
0.210 kg
|
| 2C |
33,7 mm
|
0.260 kg
|
| 2D |
42,4 mm
|
0.475 kg
|
| 2E |
48,3 mm
|
0.780 kg
|
| 2F |
60,3 mm
|
1.400 kg
|
|
Provides a perpendicular connection between two pipes. Top fitting for straight and level railing uprights.
This fitting cannot be used to join horizontal pipe within the fitting.
|
Long Tee Type 04
 |
| Type |
Size |
Weight |
| 4B |
26,9 mm
|
0.373 kg
|
| 4C |
33,7 mm
|
0.503 kg
|
| 4D |
42,4 mm
|
0.768 kg
|
| 4E |
48,3 mm
|
1.147 kg
|
| 4F |
60,3 mm
|
2.400 kg
|
|
Similar to Type 2. This fitting can be used where a join is required in the horizontal pipe.
|
Swivel Tee Type 05
 |
| Type |
Size |
Weight |
| 5C |
33,7 mm
|
0.320 kg
|
| 5D |
42,4 mm
|
0.615 kg
|
| 5E |
48,3 mm
|
0.870 kg
|
|
Male spigot may be secured within another fitting for variable angles in hand railings for staircases, ramps and similar structures.
|
Elbow 90° Type 06
 |
| Type |
Size |
Weight |
| 6B |
26,9 mm
|
0.245 kg
|
| 6C |
33,7 mm
|
0.367 kg
|
| 6D |
42,4 mm
|
0.581 kg
|
| 6E |
48,3 mm
|
0.780 kg
|
| 6F |
60,3 mm
|
2,000 kg
|
|
Pipe fittings: Elbow 90°. Elbow joint fitting used as an end fitting for the top rail.
|
Adjustable Short Type 07
 |
| Type |
Size |
Weight |
| 7B |
26,9 mm
|
0.490 kg
|
| 7C |
33,7 mm
|
0.700 kg
|
| 7D |
42,4 mm
|
1.055 kg
|
|
This adjustable angle clamp is used to join pipes between 300 and 600. Use for diagonal braces, struts and an angled top rail joint to vertical posts on stairs.
|
Straight Coupling Type 08
 |
| Type |
Size |
Weight |
| 8B |
26,9 mm
|
0.250 kg
|
| 8C |
33,7 mm
|
0.373 kg
|
| 8D |
42,4 mm
|
0,664 kg
|
| 8E |
48.3 mm
|
0,760 kg
|
| 8F |
60.3 mm
|
1.400 kg
|
|
Pipe fittings: Straight Coupling. Joint clamp for pipes of the same diameter. Do not use for heavy vertical loads. Alternative clamp is Type 9 used as an internal spigot.
|
Internal Coupling Type 09
 |
| Type |
Size |
Weight |
| 9C |
33,7 mm
|
0.145 kg
|
| 9D |
42,4 mm
|
0.189 kg
|
| 9E |
48,3 mm
|
0,254 kg
|
|
A streamlined flush joint in two pipes of the same size. Wall thickness must be 3.2 mm. Do not apply direct loads to this joint.
|
Flange Type 10
 |
| Type |
Size |
Weight |
| 10B |
26,9 mm
|
0.342 kg
|
| 10C |
33,7 mm
|
0.455 kg
|
| 10D |
42,4 mm
|
0,617 kg
|
| 10E |
48.3 mm
|
0,921 kg
|
| 10F |
60.3 mm
|
1,603 kg
|
|
Pipe fittings: Flange. This clamp is used on structures where positional fixing is required. Do not use as a base flange to support guard railings or similar systems.
|
Railing Base Flange Type 12
 |
| Type |
Size |
Weight |
| 12B |
26,9 mm
|
0.608 kg
|
| 12C |
33,7 mm
|
0.893kg
|
| 12D |
42,4 mm
|
1,261 kg
|
| 12E |
48.3 mm
|
1,530 kg
|
| 12F |
60.3 mm
|
2,700 kg
|
|
Strong baseplate to support vertical post. Vertical wide rib with two setscrews increases the strength of the clamp. The fixing holes in the base flange should be in line with the applied load.
|
Horizontal Base Railing Support Type 13
 |
| Type |
Size |
Weight |
| 13C |
33,7 mm
|
1,016 kg
|
| 13D |
42,4 mm
|
1,253 kg
|
| 13E |
48,3 mm
|
1,680 kg
|
|
Side-mounting clamp for vertical posts. Pipe cannot pass through this clamp. Designed for palm fixing guard railings and balustrades to walls, parapets, steps and ramps.
|
1/2/3/4/5/6/7/8/9
|
